Careers   |   Contact Us

Home > Defibrillator > Biphasic Defibrillator

DF-200D

  Product Name: DF-200D
  Model: DF-200D
  Inquiry:

Biphasic  Defibrillator
Physical characteristics:
Main unit: Portable
Dimensions:L320xW205xH410
Weight:9.5kg
Technical specifications  
DEFIBRILLATOR.
 (1)Defibrillator type          Manual, Synchronized, Asynchronized,   
 (2)Out put waveform        Biphasic technology                                                                           
 (3)Energy accuracy        ∠+1%
 (4)Energy selection        0,3,5,7,10,20,30,50,100,200,300,360 joule(nominal at a resistance of 50)
 (5)Charging time         Maximum 8 seconds to 360 Joules
 (6)Standard Adult/Pediatric Paddles Reusable external adult paddles(pediatric paddles integrated)           
Power requirements.
(a)AC Power supply       110V, 60 Hz /220V,50 Hz 
(b)Vehicle Voltage         DC 12V
Internal Battery Backup
(1)Battery type            Rechargeable lead-acid battery
(2)Charging time          Time-Minimum of 4 hours for full charging   
(3)Battery charging        During AC Power Supply operation of the device.
(4)Charging /Low Battery Indication      Red LED               
(5)Battery Capacity      100% of the battery will provide 120 mins of monitoring; and 30 discharges at 360 joules.
Display
LED Dimensions    7 diagonal {155mm*88mm} which is easily read from a distance.
Type       High resolution true-color graphic LED
Resolution      480X234
 Provide cardioversion facilities with waveform annotated on the screen
 Display 4 seconds of ECG at 25mm/sec, ECG selectable from leads I, II, III when used with a 3-lead cable, and I, II, III aVL, aVR, aVF and V when used with a 5-lead cable.
 Display prompts, waveform settings, battery status, event summary and fault codes. Energy selected is displayed by push button under the screen.
ECG
ECG lead: Ⅰ, Ⅱ, Ⅲ, AVR, AVL, AVF, V1~V6, GND
S-T segment analysis: -2.0~2.0mv
Arrhythmia analysis: yes
Protection: With stand 4000vAc/50Hz voltage in isolation and work against electrosurgical knife and defibrillation
Respiration
Measurement method: Thoracic impedance
Standard parameter & configuration
 ECG/ RESP/DEFIBRILLATOR
 -Provide audible and visual alarms for heart rate violations, VF and VT.
-Provide a strip printer which annotates waveforms, events, time code
-Have a 5-lead patient cable as an option to a 3-lead cable.
-Supplied with external re-usable paddles and packs of paper rolls for the printer.